Skip to main content
Version: 1.12.04

Quick Start Guide

Capture your first images with WOLF ONE in 3 simple steps.

:::info Before You Begin Make sure you have the required equipment. Check the full equipment list → :::

What You Need​

  • WOLF ONE node
  • Camera with camera sync cable (2.5mm TRS)
  • Power source (USB-C cable or 24V DC adapter)

Step 1: Connect Power​

Plug in either:

  • USB Type-C cable to your computer OR 24V DC power adapter

WOLF ONE LEDs illuminate when powered. Both power sources can be connect at the same time.

Step 2: Connect Camera​

Plug camera sync cable into any camera port on front of WOLF ONE.

Step 3: Trigger​

Using Trigger hardware buttons:

  1. Press and hold the Wake button
  2. then click the Trigger button (simultaneously).

Using Leash App:

  1. Click Wake (toggles ON)
  2. Click Trigger

Camera captures photo.

:::tip Quick Tip Most cameras need both buttons: Wake (auto-focus) + Trigger (shutter). Hold both together for best results. Button press duration is mirrored to cameras (pass-through mode) :::

Next Step​

Getting Started Guide →

Having issues? See Troubleshooting